SOLARIS7: BATTLEMECH TECHNICAL READOUT: ARCHIVE ID #14175
WEDNESDAY, JULY 28, 2010
141 DOWNLOADS
[http://www.solaris7.com/TRO/HTMLBattleMech/BattlemechInfo.asp?ID=14175]
WEDNESDAY, JULY 28, 2010
141 DOWNLOADS
[http://www.solaris7.com/TRO/HTMLBattleMech/BattlemechInfo.asp?ID=14175]
Banshee BNC-5TX
Custom Level 2 / 3067
Age of War/Star League [Introductory]
Inner Sphere Biped
95 Tons
Banshee BNC-5TX
| Rules Level: | Tournament Legal |
| Technology Base: | Inner Sphere |
| Chassis Config: | Biped |
| Production Year: | 3070 |
| Extinct By: | Never |
| Chassis: | Unknown Endo-Steel |
| Power Plant: | Unknown 380 Fusion XL Engine |
| Cruising Speed: | 43.0 km/h |
| Maximum Speed: | 64.5 km/h |
| Jump Jets: | None |
| Jump Capacity: | 0 meters |
| Armor: | Unknown Standard w/ CASE |
| Armament: | |
| 1 Rotary AC/5 | |
| 1 MRM-30 | |
| 3 Light PPCs | |
| 1 MML-7 | |
| Manufacturer: | Unknown |
| Primary Factory: | Unknown |
| Communications System: | Unknown |
| Targeting and Tracking System: | Unknown |
Overview
Just thought I would tweak Dark Sin's Banshee a litte :)
- Removed the TSM since I saw no real use for it, don't want to get to close with an XL engine. Also have no lasers to fine tune it with.
- Removed 2 heatssinks.
- Fixed the ammo to full tons
- Added CASE
- Switched out one of the tons of MML ammo for SRM inferno
- Added Endo Steel
- Added armour
Would probably want to tweak it again and try to get a Targeting computer in there :)
| Technology Base: | Inner Sphere | 95 tons | |
| Chassis Config: | Biped | Cost: | 25 571 540 C-Bills |
| BV2: | 1 933 | Tech Rating/Era Availability: | E/X-X-E |
| Equipment | Mass | ||
| Internal Structure: | Endo-Steel | 5.0 | |
| Internal Locations: 2 CT, 2 LT, 5 RT, 1 RA, 2 LL, 2 RL | |||
| Engine: | 380 | XL Engine | 20.5 |
| Walking MP: | 4 | ||
| Running MP: | 6 | ||
| Jumping MP: | 0 | ||
| Heat Sinks: | 15 (30) - Double (15 in engine) | 5.0 | |
| Gyro: | Standard | 4.0 | |
| Cockpit: | Small | 2.0 | |
| Actuators: L: SH+UA+LA+H R: SH+UA+LA+H | |||
| Armor: | 293 points - Standard | 18.5 | |
| CASE Locations: 1 LT | 0.5 | ||
| Internal | Armor | ||
| Structure | Factor | ||
| Head: | 3 | 9 | |
| Center Torso: | 30 | 43 | |
| Center Torso (rear): | 17 | ||
| R/L Torso: | 20 | 30 | |
| R/L Torso (rear): | 10 | ||
| R/L Arm: | 16 | 32 | |
| R/L Leg: | 20 | 40 | |
| Weapons and Ammo | Location | Heat | Criticals | Tonnage |
| Light PPC | HD | 5 | 2 | 3.0 |
| 2 Light PPCs | RT | 10 | 4 | 6.0 |
| MML-7 | LT | 4 | 4 | 4.5 |
| MRM-30 | RA | 10 | 5 | 10.0 |
| Rotary AC/5 | LA | 6 /shot | 6 | 10.0 |
| @MML-7 (LRM) (17) | LT | -- | 1 | 1.0 |
| @MML-7 (SRM Inferno) (14) | LT | -- | 1 | 1.0 |
| 2 @MRM-30 (16) | RA | -- | 2 | 2,00 |
| 2 @Rotary AC/5 (40) | LA | -- | 2 | 2,00 |
User Reviews
Design Updated on 7/28/2010 11:10:03 AM
7/28/2010
4 Ice_Lion
I still believe a HPPC would fit in better than the Rotary AC/5 with the MRM-30, but still a good fire-support mech and if some thing gets too close, inferno them and move away...
Design Updated on 7/28/2010 8:04:07 AM
7/28/2010
Yeah I would probably go with a HPPC myself too, didn't want to change his design too much though. Just clean it up a bit, because I kind of liked it :)